No I was worried cause I got mine in the week and it was almost £100 for the rail tidy .... I'm relieved ?No no no, just the tidy for that, sorry if I got your hopes up lol
Just got to set aside a rainy day to fit it
Yes the led light connector is different and they include a conversion kit to redo the original connector coming from the bike. I choose not to change that, I cut of the one coming from the tail tidy kit and redone it so it fits the original from the bike. Rather mess with the tail tidy kits cabels than the bikes, right?I got a Yamaha one, ended up being a bit of a Meccano set to put together including the led indicators. I think for £100 it's good value.
Is it true that the led tail light connector is different from the original?
good luck to you sir, and don't forget to post pictures here when ur doneSounds reasonable to me mate, seems a bit weird it didn't either come with the right connectors in the first place AND make you cut the wiring on the bike.
Going to try and get it done during the week.
Yes but you get a lot for it.is very cool, but very expensive
You have a plastic cover included in the set??Oh yes one other slight annoyance is that there is no plastic to cover the hole where the tail tidy mounts to the frame. I would have hoped they'd include something in the kit. This leaves a 4cm square hole where water can get under the pillion seat.
heres a pic from underneath. You must have missed to fit that little plastic cover that the cables come out of? that seems like 4cm square as you are talking about is a hole for your set up.Oh yes one other slight annoyance is that there is no plastic to cover the hole where the tail tidy mounts to the frame. I would have hoped they'd include something in the kit. This leaves a 4cm square hole where water can get under the pillion seat.
it fits the stock indicators and you don't need to look online cause you get got instructions included when you buy it!Looks nice.
Will the stock indicators fit with the new licence plate holder, or do you need to change to the led-type indicators?
Has anyone found a manual online describing the installation?
Job done apart from the 2 rear plastic clips that don't stay in place in the undertray
you can order those from your dealer...its the same shorter ones that are located more to the front of the cover!
I went back to the dealer that got me the kit and he gave me this out of another box as I didn't have one. I have now fitted this too.heres a pic from underneath. You must have missed to fit that little plastic cover that the cables come out of? that seems like 4cm square as you are talking about is a hole for your set up.
View attachment 393
The instructions are just pictures, but you get used to them very quickly and it shows you all you need to know. You can get some written instructions on the R&G website which describes which panels need to be removed and how, but the actual tail tidy bit is not the same, but the pictures and words are useful all the same.it fits the stock indicators and you don't need to look online cause you get got instructions included when you buy it!