Hi,
Just wondering if I could get some help with a issue I have, my front LED and integrated tail light were working fine as I finished installing everything but now after a few more tests they don't turn on. I've never had this issue before with other bikes I've owned.
Motorcycle: 2014 Yamaha MT-07/FZ-07
Issue: Indicators not physically illuminating and not displaying on dash
I wrote up some possible questions that may be asked, with my responses:
When you signal left or right does the dash indicator light up left or right? It doesn't light up on the dash whether it be left, right or hazards. In addition the actual indicators don't illuminate, stock or aftermarket setup.
Did you install resistors? Yes, even replaced the stock flasher relay with a LED flasher relay.
Did you try to start the engine and see if it works? Yes, tried this but no difference.
Did you put everything back to stock and see if it works? Yes, tried this which also made no difference.
Did you check the switch if it needs replacement? Took it apart and everything looked fine.
Did you check the fuse? Yes, none were blown. Even replaced the signal fuse with a new one which made no difference.
Did you check all the wiring loom for damage or loose connections? Yes, literally the entire loom (start to finish) with no difference.
I'm baffled as I even put the stock connection back on and it doesn't work. Any help would be appreciated!
Just wondering if I could get some help with a issue I have, my front LED and integrated tail light were working fine as I finished installing everything but now after a few more tests they don't turn on. I've never had this issue before with other bikes I've owned.
Motorcycle: 2014 Yamaha MT-07/FZ-07
Issue: Indicators not physically illuminating and not displaying on dash
I wrote up some possible questions that may be asked, with my responses:
When you signal left or right does the dash indicator light up left or right? It doesn't light up on the dash whether it be left, right or hazards. In addition the actual indicators don't illuminate, stock or aftermarket setup.
Did you install resistors? Yes, even replaced the stock flasher relay with a LED flasher relay.
Did you try to start the engine and see if it works? Yes, tried this but no difference.
Did you put everything back to stock and see if it works? Yes, tried this which also made no difference.
Did you check the switch if it needs replacement? Took it apart and everything looked fine.
Did you check the fuse? Yes, none were blown. Even replaced the signal fuse with a new one which made no difference.
Did you check all the wiring loom for damage or loose connections? Yes, literally the entire loom (start to finish) with no difference.
I'm baffled as I even put the stock connection back on and it doesn't work. Any help would be appreciated!