mods for my new fz, handle bar, exhaust and plate.


J

joeharth

New member
Hello I got my fz this week. I am thinking about swapping the handle bar. I have 3 handle bars at home from my XS11. One is the drag bar with raisers. Looks like it could be a good one for the fz07. I also have a cafe racer bar. Has anyone changed the handle bar.

I am also thinking about modifying the exahaust. I am waiting till I get 1000 miles on the bike. I am planing to drill through the tube outside the pipe and add a small harley davidson baffle in the tube for back pressure. This one should be the easiest mod I have read a few threads on this one.

For the plate I want to move it up. I am thinking to drill a couple of holes may be 4, cut long stick it and then put a bolt holding the two pieces.

If anyone has pictures of suggestions on this complex procedures please post the link to the thread. Thanks
 
D

Deleted member 20

Guest
I have replaced with Renthal Road Ultra Low. No mods required, just drill for controls and bolt it on the bike.
 
J

joeharth

New member
Thanks Anders, Do you like the riding position better with the Renthal Road Ultra Low handlebar? Is it a little bet more agressive (sport)?
 
J

joeharth

New member
Hello guys I have a video and I must said. First I shopped the tip. Then I drilled to the side from the hole of the exhaust tip but that was not enough. So I drilled a second time from the hole where the tip attaches to the front of the exhaust where the headers connect to the exhaust. My drill has a 1/2 inch and that worked pretty good. So I put back the tiny baffle here
http://www.fastmamajama.com/images/shorty.jpg

and added a cover to make it look stock hopefully it will pass inspection next year. This is the cover part number Superior 28-6202 3" x 7"

http://www.fastmamajama.com/images/shorty2.jpg

I have a clip with the sound but this was last night and my wife was sleeping so I havent had time to test it but it sounded good.
 
You must log in or register to reply here.


Top