claustro
New member
Hi all,
I was very tired regarding the position of the stock horn button so I decided to build a new one and put it in the "normal "position.
I used a cheap button found on ebay , I made a small house of plastic and glued the button on it , then filled the small gaps with silicone.
I used the bottom screw to fix the plate in position ,and then I soldered the 2 cables form my new button to the original contact.
With this mod I have finally a button in the right place
I can change it back to stock without problem any time.
Regards.
Andrea![20150626_174036 (Small).jpg](/data/attachments/1/1610-f6f9df1628892cbe6c9b86f4d8de0afb.jpg)
![20150626_174047 (Small).jpg](/data/attachments/1/1611-2a617a209173c66b2b6957f70cf51a67.jpg)
![20150626_174118 (Small).jpg](/data/attachments/1/1612-d0eb02b83a6ba5e83777c0f5e26a5506.jpg)
I was very tired regarding the position of the stock horn button so I decided to build a new one and put it in the "normal "position.
I used a cheap button found on ebay , I made a small house of plastic and glued the button on it , then filled the small gaps with silicone.
I used the bottom screw to fix the plate in position ,and then I soldered the 2 cables form my new button to the original contact.
With this mod I have finally a button in the right place
I can change it back to stock without problem any time.
Regards.
Andrea
![20150626_174036 (Small).jpg](/data/attachments/1/1610-f6f9df1628892cbe6c9b86f4d8de0afb.jpg)
![20150626_174047 (Small).jpg](/data/attachments/1/1611-2a617a209173c66b2b6957f70cf51a67.jpg)
![20150626_174118 (Small).jpg](/data/attachments/1/1612-d0eb02b83a6ba5e83777c0f5e26a5506.jpg)
Last edited: